Customization: | Available |
---|---|
After-sales Service: | Online Support/Free Accessories |
Warranty: | 1 Year |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Model | HZ-1.5T |
Overall Dimensions | 3700×1350×1850mm |
Cargo Box Dimensions | 2150×1350×1150mm |
Load Capacity | 1.5T |
Rated Load | 1T |
Track Width | 1500mm |
Wheelbase | 2800mm |
Cargo Box volume | 5.07m³ |
Travel speed | Low speed: 25KM/H High Speed: 55KM/H |
Oil tank capacity | 16L |
Min ground clearance | 230mm |
Min. Turning Radius | 3.5m |
Engine power | 11.5KW |
Fuel Consumption | 3.7L/100km |
Speed Control System | Gasoline Carburetor |
Engine Displacement | 200ml |
Engine Cooling Method | Water-cooled + Air-cooled |
Tire Size & Requirements | Front: 500-12, Rear: 550-13 |
Front Shock Absorber | Reinforced Type-60 dual-spring hydraulic telescopic alloy suspension |
Front Steering Sleeve Structure | Steering shaft sleeve with 5mm thick steel tube |
Lighting & Signal System | 12V |
Max Climbing Ability | ≥40° |
Power Transmission System | Drive Shaft |
Steering Method | Handlebar Steering |
Braking System | Foot-operated hydraulic braking system |
Brake Type | Foot-operated hydraulic drum brake + manual parking brake |
Cabin Material & Lighting | Integrated stamped steel cabin with LED headlights |
Cargo Door & Cover | Side-opening rear door with 270° rotation to the right; cover made of 1.2mm cold-rolled steel; top lid opens upward from the tipping side; door secured with automotive latches |
Cargo Box Material & Structure | Front, rear, and side panels made of 1.2mm cold-rolled steel; floor made of stainless steel with waterproof sealing ≥8cm |
Drive Axle | Heavy-duty reinforced axle with 250mm large brake drum and dual hydraulic braking |
Rear Suspension | Dual set of main and auxiliary leaf springs (26kg total) for enhanced load-bearing capacity |
Frame Material | Manganese steel chassis with cathodic electrophoresis anti-corrosion treatment |
Barrel Lifting Time (Empty Bin) | ≤15s |
Barrel Lowering Time (Empty Bin) | 10s |
Cargo Box Lifting Time | ≤13s |
Hydraulic Oil Tank Capacity | 8L |
Hydraulic Control Valve Mode | Speed-controlled operation |
Barrel Tipping Device | Equipped with 10mm thick iron symmetrical lifting brackets; tipping angle ≥138° ensures full waste discharge |
Bin Compatibility | Compatible with standard 240L trash bins |
Bin Lid Pull Rod | Adjustable and fixed type |
Tipping Mechanism | Rotating main shaft made of seamless steel pipe (outer diameter 34mm, inner diameter 24mm); main shaft support flange made of national standard No.6 channel steel |
Bin Hook Limiting Method | Equipped with a stopper pin at the lowest position of descent |
Tipping Rail Material & Structure | Main track made of reinforced channel steel; bin hook guiding wheels equipped with solid shaft bearings |
Tipping Device Mounting Method | Detachable connection between barrel lifter, tipping system, and cargo box; front and rear adjustable loading frame |
Hydraulic Pipe Layout | High-pressure hose and flexible tubing are crimped and joined along the tipping track, secured with special pipe clamps |
Cylinder Configuration | Double-stroke single cylinder for barrel tipping; single-stroke dual cylinders for cargo box lifting |
Hydraulic Line Routing | Lines are routed along the side of the chassis (not underneath), preventing damage from road debris during driving |