Automatic Dry High Efficiecy Sandblasters Shot Blasting Machine Concrete

Product Description

Automatic Dry High Efficiecy shot blasting machine
Road Surface shot blasting machine can successively clear away the concrete surface laitance and impurities, and can do polishing processing to the concrete surface, making its surface achieve uniform roughness. Greatly improve the adhesive strength of the waterproof layer and concrete base, so that better combine the waterproof layer and deck.

Product Parameters

Model	ID-RA270	ID-RA550	ID-RA850
Working width	270mm	550mm	800mm
Walking speed	0.5-20m/min	0.5-33m/min	0.5-33m/min
Concrete(steel) surface cleaning efficiency	80m³/h	80m³/h	160m³/h
Diameter dust pipe	120mm	150mm	150mm
Steel shot diameter	1.2-1.5mm	1.5-1.8mm	1.5-1.8mm
Steel shot consumption	10g/m²	10g/m²	10g/m²
Dimension	1000*300*1100mm	2050*725*1460mm	1950*1020*1550mm
Shot wheel diameter	200mm	200mm	200mm

Blast processing equipment is widely used in improving asphalt pavement roughness and friction coefficient, and improve surface adhesion, ensure traffic safety. At the same time also can remove the asphalt attachments (such as fuel, oil, etc.) is mainly used in the following aspects:
1. It is used to improve the asphalt pavement roughness and friction coefficient, so as to improve the adhesion of the road surface and ensure the safety of driving. At the same time, asphalt fixtures (such as fuel, oil, etc.) also have nowhere to run, thus improving the skid resistance of the pavement
2. Anti-corrosion coating of the steel bridge deck
The application of shot blasting in the anticorrosive coating of steel bridges is undeniable. Most Bridges under construction and completed construction use a shot blasting machine for surface cleaning and roughness treatment prior to antiseptic primers or other sprays
3. Tunnel maintenance
Due to the consideration of waterproof, fire resistance, and oil resistance of materials, cement concrete is generally used for the pavement inside the tunnel. But it also puts forward a higher requirement for the anti-skid performance of the long tunnel road surface. Shot blasting technology is a treatment method with simple construction, small equipment input, remarkable effect, and environmental protection.
4. Preventive maintenance of airport runways
The use of road shot blasting machines makes the removal of tread marks and marking on concrete and asphalt runway easy and simple. The treatment range of the road blasting machine is to remove the tread (rubber), remove the marking, restore and increase the surface roughness of the airport runway and increase the friction coefficient of the runway. Moreover, in the process of treatment, the road blasting is more orderly.
5. Municipal roads and paved roads
All kinds of road paving in the city can use the shot blasting machine for cleaning treatment, and remove the road signs and markers, for busy intersections, the road surface can be brushed, improving the pavement roughness and friction coefficient. Reduce problems in pavement construction. Therefore, the auxiliary role of road blasting machines in urban.

Detailed Photos

The pill material is stored in the lower part of the separation tank by the feed tube into the shot blasting parts shot blast wheel at high-speed relation by blasting machine motor, the pill is accelerated to 80m/s clean the surface, high-speed energy pills material impact work surface. Under negative pressure pills, materials and dust were back to the dust separation box, where they completed the separation of pill material and dust and impurities, good pill material into the shot blasting parts continue to use, and dust and impurities are filtered and slipped into closed set dust box waiting to be processed.

Dust Removal System
With a better understanding of environmental awareness, protection, and management, improving the environment has been the consensus of the whole society. With our long-term research, analysis, and practice to get shot blast machine industry experience, our factory makes a new design with every shot blasting machine, we aim to improve our working conditions for employees and improve the comprehensive economic benefits. Dust removal system including dust collector, fan, fan piping, the connection pipeline between the filter and the main machine, etc.
 

 

The shot blasting machine is equipped with OMRON international brand Power protection device imported from Japan.
Notice: it keeps the Simpler operation, our concrete shot blaster with OMRON full protection power system in Japan. It can cut off the control system in 0.3 seconds and give a machine fault indication, thus avoiding the loss of the user, If a power failure occurs.

Packaging & Shipping

1 unit was packed into an iron frame and then packed with 5 layers of corrugated carton. 4 strips reinforced the carton. the fix package guaranteed the machines were not damaged during transportation

Company Profile

In 2000, "Ideal machinery" started a small workshop in Changge city, assembling rebar cutting machines and bending machines. through 20 years of development and relying on word-of-mouth advertising, our product involved kinds of light construction machines. In order to push our machines into the overseas market, the Brand "Ideal machinery" is established in 2015 and started export trading. until now, nearly 10,000 sets of our machines are servicing overseas construction sites now.

FAQ

Q1. What can we do if there are problems with the products?
A: Our engineers will analyze the problem for you and find the best solution. If problems happened within the guaranteed time, we can replace the components for you free of charge. We have dealers in some countries, for some technical problems which you can not solve by yourself.

Q2. What is the delivery time for your products?
A: Once we promise the delivery time, we will try our best to fulfill it. Special procedures such as emergency inventory will be used to maintain your uninterrupted supply of the products.

Q3. Is there any guarantee for your products?
A: Most of our products have one year guarantee(for the main parts).

Q4. How can you control your product quality?
A: Quality is always considered the most important part of our manufacturing process. All of our products come under a strict quality control system from raw material inspection, component inspecting,semi-finished product inspecting, and performance test of finished products, to random inspection before delivery.